What are the steps to install an ink scraper in an intaglio press?

date：[2018-05-15] pk_hits：

The installation steps of the scraping knife of gravure printing machine in the open box to pull, please take the blade to prevent knife scratch. Check the cleaning scraper. With a knife edge, you must face up. The scraper must clamp on the standard knife, knife between lining and knife should be clean, no residual ink lumps, to ensure the verticality of the blade clamping. The distance between the ink scraper, the knife lining and the tool post, please refer to the installation size of the following picture, and correctly install the scraper to prevent the fracture of the ink scraping blade and prolong the service life of the ink scraper.

This is the installation step of the squeegee in the gravure press.

Prev：What's the squeegee knife in the gravure press?
Next：What are the rollers in an intaglio press?

Popular products

News Recommendation

If you have any product questions or suggestions, or you want to know, you can contact us at any time.

Building 2, Jingye Road, Sanqiao, Dongshan Economic Development Zone, Ruian City, Zhejiang Province
13396778787 15355956668
0577-65167588
0577-65161388
rg@rgyj.net

message